ProSt diesel FWD

Monday, 05 October 2009 15:00

Q.  If changing engine from Ford or Chevy to a Cummins, which “stock location” should be used for the engine location? Is there a set dimension I should shoot for in reference to the back of the block & the centerline of the front axle?   A. The back surface of the replacement block (where the belhousing mounts) must be in the OEM location as it relates to front axle, OEM body etc.   Q. If using a dual rear tire set-up, is there a width limit on the front or the rear end, and if so, where should the front tires track in reference to the rear? Can the front tires track all the way to the outside of the rear end?   A. The outside edge of the tire on the narrow axle must overlap the centerline of the tire on the wide axle by at least one inch.   Q. can I use a driveline brake only as 'Brakes"? A. No, not for ProSt diesel FWD

Last Updated on Monday, 05 October 2009 15:04